Anti-Theft System - Passive DTCS
POWERTRAIN CONTROL MODULE (PCM) DIAGNOSTIC TROUBLE CODE (DTC) INDEX
| DTC | Description | Source | Action |
|---|---|---|---|
| B1213 | Anti-theft number of programmed encoded ignition keys below minimum | PCM | Program additional keys. For additional information, refer to KEY PROGRAMMING USING TWO PROGRAMMED KEYS . TEST the system for normal operation. |
| B2103 | Antenna not connected | PCM | Go To PINPOINT TEST A . |
| B1600 | No key code received | PCM | Go To PINPOINT TEST B . |
| B1601 | Incorrect key code received | PCM | Go To PINPOINT TEST C . |
| B1602 | Invalid key code format from encoded ignition key transponder | PCM | Go To PINPOINT TEST D . |
| B1681 | PATS transceiver signal is not received | PCM | Go To PINPOINT TEST E . |
| B2431 | Transponder programming failure | PCM | Program an additional key. For additional information, refer to KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT . TEST the system for normal operation. |
| B1342 | PCM is defective | PCM | INSTALL a new PCM. REFER to REMOVAL & INSTALLATION in ENGINE PERFORMANCE. CLEAR the DTCs. REPEAT the self-test. |
| - | All other DTCs | - | REFER to MULTIFUNCTION ELECTRONIC MODULE . TEST the system for normal operation. |