LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Mustang Mach 1, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Component Tests >> Starter Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Starter Relay

  1. Remove starter relay from battery junction box. Battery junction box is located in left side of engine compartment, in front of strut tower. Check relay continuity. Continuity should exist between relay terminals No. 85 and 86, and between relay terminals No. 30 and 87a. See Figure . Continuity should not exist between relay terminals No. 30 and 87. If continuity is as specified, go to next step. If continuity is not as specified, replace relay.
  2. Using a jumper wire, apply battery voltage to relay terminal No. 85. Using a second jumper wire, ground relay terminal No. 86. Continuity should now exist between relay terminals No. 30 and 87. If continuity is not as specified, replace relay. If continuity is as specified, relay is okay at this time.
scientia non olet · About LEMON Manuals