LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Mustang Mach 1, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal And Installation >> Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Module: Removal

  1. Remove the hydraulic control unit (HCU). Refer to HYDRAULIC CONTROL UNIT .
  2. Remove the pump motor electrical connector.
    Fig 1: Removing Pump Motor Electrical Connector
    G01623167Courtesy of FORD MOTOR CO.
  3. Remove the anti-lock-brake control module screws.
    Fig 2: Removing Anti-Lock-Brake Control Module Screws
    G01623168Courtesy of FORD MOTOR CO.
  4. Remove the anti-lock-brake control module from the HCU.
scientia non olet · About LEMON Manuals