Anti-Lock Brakes DTCS
ANTI-LOCK BRAKE SYSTEM (ABS)/TRACTION CONTROL MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Action |
|---|---|---|---|
| B1342 | ECU Is Defective | ABS | CLEAR the DTCs. RETRIEVE the DTCs. If DTC B1342 is retrieved, INSTALL a new module. REFER to ANTI-LOCK BRAKE SYSTEM (ABS) MODULE . REPEAT the self-test. If other DTCs are present, REPAIR them before installing a new component. |
| B1676 | Battery Pack Voltage Out of Range | ABS | Go to PINPOINT TEST B . |
| B2477 | Module Configuration Failure | ABS | Follow the diagnostic tool directions for the calibration procedure. REFER to MODULE COMMUNICATIONS NETWORK . |
| B2900 | VIN Mismatched | ABS | VERIFY that the module has the correct as-built data. |
| C1095 | ABS Hydraulic Pump Motor Circuit Failure | ABS | Go to PINPOINT TEST C . |
| C1145 | Wheel Speed Sensor RF Input Circuit Failure | ABS | Go to PINPOINT TEST D . |
| C1155 | Wheel Speed Sensor LF Input Circuit Failure | ABS | Go to PINPOINT TEST D . |
| C1165 | Wheel Speed Sensor RR Input Circuit Failure | ABS | Go to PINPOINT TEST D . |
| C1175 | Wheel Speed Sensor LR Input Circuit Failure | ABS | Go to PINPOINT TEST D . |
| C1233 | Wheel Speed LF Input Signal Missing | ABS | Go to PINPOINT TEST E . |
| C1234 | Wheel Speed RF Input Signal Missing | ABS | Go to PINPOINT TEST E . |
| C1235 | Wheel Speed RR Input Signal Missing | ABS | Go to PINPOINT TEST E . |
| C1236 | Wheel Speed LR Input Signal Missing | ABS | Go to PINPOINT TEST E . |