Register - Center: Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Install the louver assembly.

Fig 1: Louver Assembly

Courtesy of FORD MOTOR CO.

Install the register.

NOTE: Use care when melting the heat stakes not to melt, warp, or damage the center finish panel.

Use a soldering iron to melt the heat stakes.

Fig 2: Register Stakes

Courtesy of FORD MOTOR CO.

Install the center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
Install the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.