LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Windstar Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2032 (Front Disc Brake System) >> Removal And Installation >> Front Disc Brake >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Disc Brake: Removal

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake caliper anchor plate. For additional information, refer to Brake Caliper Anchor Plate .
  2. Remove the brake disc and hub in the following sequence:
    1. Remove the hub grease cap.
    2. Remove the cotter pin.
    3. Remove the nut retainer.
    4. Remove the spindle nut.
    5. Remove the outer wheel bearing retainer washer.
    6. Remove the outer wheel bearing.
    7. Remove the brake disc and hub.
  3. Remove the wheel hub grease seal and inner wheel bearing in the following sequence:
    1. Remove the wheel hub grease seal.
    2. Remove the inner wheel bearing.
  4. Inspect the brake disc and resurface or install new as necessary. For additional information, refer to the Diagnosis and Testing portion of BRAKE SYSTEM - GENERAL INFORMATION article.
scientia non olet · About LEMON Manuals