Removal and Installation
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- If equipped with an automatic transaxle, remove the selector lever trim ring.
- If equipped with a manual transaxle, remove the gearshift knob.
- Open the storage compartment door.
- Pull the floor console finish panel straight up to release the retainer clips and remove the finish panel.
- Disconnect the ambient lighting module electrical connector.
- Remove the 2 screws and the ambient lighting module.
- To install, reverse the removal procedure.