Latch-Rear Seat, 60/40 Split: Installation

If equipped with pull straps, install the seat back latch.
1. Position the seat back latch.
2. Install the screws.
Fig 1: Installing Seat Back Latch Screws
Courtesy of FORD MOTOR CO.
If equipped with release knobs, install the seat back latch.
1. Connect the seat back latch to the seat back release knob.
2. Install the screws.
Fig 2: Installing Seat Back Latch Screws
Courtesy of FORD MOTOR CO.
Invert the rear seat trim up to the hog ring flap.

Fig 3: Inverting Rear Seat Trim Up To Hog Ring Flap
Courtesy of FORD MOTOR CO.
Install the hog rings.

Fig 4: Installing Hog Rings
Courtesy of FORD MOTOR CO.
Hook the retainer.

Fig 5: Hooking Retainer
Courtesy of FORD MOTOR CO.
Install the rear seat back; refer to LATCH-REAR SEAT, 60/40 SPLIT .