Timing Drive Components - Timing Sprockets: Installation

CAUTION: The variable camshaft timing (VCT) sprocket has a rectangular tab on the backside of the sprocket which must align with the hole on the front face of the thrust bushing. Failure to align may result in poor engine performance.

Fig 1: Tightening Bolt With Torque Specification (1 Of 2)

Courtesy of FORD MOTOR CO.

Fig 2: Tightening Bolt With Torque Specification (2 Of 2)

Courtesy of FORD MOTOR CO.

Fig 3: Installing Bolt And Intake Camshaft Timing Sprocket

Courtesy of FORD MOTOR CO.

To install, reverse the removal procedure.