Anti-Lock Brake System (ABS) Module

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery.
Remove the parts in the order indicated in the following illustration and table.

Fig 1: Removing Anti-Lock Brake System (ABS) Module Components
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.

Item 3: Anti-Lock Brake System (ABS) Module Removal Note

Position the battery junction box (BJB) aside.
1. Release the clips.
2. Position the BJB aside.

Item 3: Anti-Lock Brake System (ABS) Module Installation Note

Use the diagnostic tool to reconfigure the ABS module. For additional information, refer to MODULE COMMUNICATIONS NETWORK .