Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. For additional information, refer to JACKING & HOISTING .
Remove the wheel speed sensor (wheel removed for clarity).

Fig 1: Removing Wheel Speed Sensor
Courtesy of FORD MOTOR CO.
Disconnect the wheel speed sensor wiring harness.
1. Disconnect the electrical connector.
2. Detach the clips.
Fig 2: Disconnecting Wheel Speed Sensor Wiring Harness
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.