Quick Test 1.0 - Visual Inspection

Carry out the Visual Check and Vehicle Preparation procedures as outlined in the SELF-DIAGNOSTICS - CNG, FLEX-FUEL & GASOLINE .

Inspect the following:

• Air cleaner and inlet ducts.
• Engine vacuum hoses for damage such as leaks, cracks, blockage, correct routing, etc.
• PCM system wiring harnesses for correct connections, bent or broken pins, corrosion, loose wires, correct routing, etc.
• PCM, sensors, and actuators for physical damage.
• Engine coolant for correct level.
• Transmission fluid for correct level and condition.
• Non-factory installed items wired into the transmission or PCM harnesses.

Carry out all necessary repairs before continuing with Quick Tests.