LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> ZX2 Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> In-Vehicle Repair >> Exhaust Manifold >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Exhaust Manifold: Installation

    CAUTION: Do not use abrasive grinding discs to remove gasket material; use only plastic manual scrapers. Do not scratch or gouge the aluminum sealing surfaces.
    Fig 1: Exhaust Manifold Bolt/Nut Tightening Sequence
    G01371029Courtesy of FORD MOTOR CO.
    Fig 2: Installing Heat Shield Bolt/Nut
    G01371030Courtesy of FORD MOTOR CO.
    Fig 3: Installing Oil Level Indicator Tube Bracket Bolt
    G01371031Courtesy of FORD MOTOR CO.
  1. Follow the removal procedure in reverse order.
    • Install the new exhaust manifold gasket.
    • Install the exhaust manifold.
    • Install the bolts and nuts.
    • Tighten the bolts and nuts in the sequence shown in Fig 1.
scientia non olet · About LEMON Manuals