Front Disc Brake: Installation
WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Clean any rust or debris from brake disc and wheel hub.
- Use parts cleaner to clean the front brake disc and hub surfaces.
- Apply a thin coat of anti-seize lubricant to the hub flange.
- Install the brake disc.
- Position the brake caliper and brake caliper anchor plate assembly and install the 2 bolts.
- Tighten to 136 Nm (100 lb-ft).