Camshaft Runout

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOL(S) CHART

Courtesy of FORD MOTOR CO.

Dial Indicator Gauge with Holding Fixture
100-002 (TOOL-4201-C) or equivalent

NOTE: Camshaft journals must be within specifications before checking runout.

Use a Dial Indicator Gauge with Holding Fixture to measure the camshaft runout.
- Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading.
- For additional information, refer to the General Specification chart in the appropriate engine article.
- If out of specification, install new components as necessary. Refer to the appropriate article for the procedure.
  
  Fig 1: Measuring Camshaft Runout
  Courtesy of FORD MOTOR CO.