Digital Transmission Range Sensor

CAUTION: When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See appropriate COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery. Before testing starter, ensure transmission is in Park or Neutral.

With the vehicle in NEUTRAL, position it on a hoist. Remove the battery and tray. Disconnect the TR sensor electrical connector. Loosen the TR sensor bolts.
Make sure the transaxle is in the NEUTRAL position. Using the TR Sensor Alignment Gauge, (T97L-70010-A), align the TR sensor and tighten the bolts. Connect the electrical connector. Before installing the battery tray, check the vent tube hose for any obstructions, kinks, or incorrect routing position. Check the correct operation with parking brake control engaged. The engine should start only in PARK or NEUTRAL. Backup lamps should illuminate in the REVERSE position.