LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2004 >> Escape 2.0 B >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Control System >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the powertrain control module (PCM) cover.
    1. Loosen the bolt and disconnect the electrical connector.
    2. Remove the nuts and the cover.
    Fig 1: Removing Powertrain Control Module Cover
    G02740139Courtesy of FORD MOTOR CO.
  3. Remove the PCM.
    Fig 2: Removing PCM
    G02740140Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals