Removal and Installation

NOTE: When installing a new module, it must be calibrated and reconfigured (either by download/upload or uploading the as-built database method).

CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
Disconnect the anti-lock brake control module electrical connector.

Fig 1: Disconnecting Anti-Lock Brake Control Module Electrical Connector
Courtesy of FORD MOTOR CO.
Remove the screws and the anti-lock brake control module.

Fig 2: Removing Screws And Anti-Lock Brake Control Module
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.