Transmission - 4x2: Notes

WARNING: Secure the transmission to the transmission jack with a safety chain. Failure to follow these instructions can result in personal injury.
1. Secure the transmission to the transmission jack with a safety chain.
2. Illustration 1 of 3. Install the components in the order indicated in the following illustration and table.
   Fig 2: Identifying Installation Order Of Transmission - 4x2 (1 Of 3)

   Courtesy of FORD MOTOR CO.
3. Illustration 2 of 3. Install the components in the order indicated in the following illustration and table.
   Fig 3: Identifying Installation Order Of Transmission - 4x2 (2 Of 3)

   Courtesy of FORD MOTOR CO.
4. Illustration 3 of 3. Install the components in the order indicated in the following illustration and table.
   Fig 4: Identifying Installation Order Of Transmission - 4x2 (3 Of 3)

   Courtesy of FORD MOTOR CO.
5. Install the driveshaft. For additional information, refer to DRIVELINE SYSTEM .
6. Connect the battery ground cable. For additional information, refer to BATTERY & CHARGING SYSTEM .
7. Position the fan shroud and install the bolts.
8. Carry out the fluid level check. For additional information, refer to TRANSMISSION FLUID LEVEL CHECK .
9. Verify that the shift cable is correctly adjusted. For additional information, refer to SELECTOR LEVER CABLE ADJUSTMENT .
10. Check the operation of the transmission and inspect for leaks.