System Specifications

Engine front cover bolts 19 Nm (14 ft. lbs.)
Crankshaft Pulley and Crankshaft Seal-Early Build
Crankshaft Pulley Bolt
Using the special tool tighten the bolt in two stages:
Tighten 45 Nm (33 ft. lbs.)
Tighten an additional 85 degrees
Crankshaft Pulley and Crankshaft Seal-Late Build
Crankshaft Pulley Bolt
Using the special tool tighten the bolt in two stages:
Tighten 45 Nm (33 ft. lbs.)
Tighten an additional 85 degrees.