Switch State Control

KEY PROGRAMMING SWITCH STATE CONTROL

NOTE:
- The spare key programming switch is a programmable switch which provides the capability to enable/disable the normal customer spare key programming procedure detailed in the Owner's Manual. This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want the spare key programming procedure available to the vehicle driver.
- The spare key programming switch state can be viewed by PATS PID SPARE KY.

1. Insert a programmed ignition key into the ignition lock cylinder and turn the ignition switch from the OFF position to the RUN position.
2. Select PCM from the diagnostic tool menu. Follow the anti-theft security access to obtain security access.

3. NOTE: The default setting on delivery of all new vehicles is {ENABLE}.

From the diagnostic tool menu: Toggle SPARE KEY PROGRAMMING SWITCH selection to desired setting.

{ENABLE} Spare Key Programming Procedure is accessible.

{DISABLE} Spare Key Programming Procedure is not accessible.