Anti-Theft System - Pats
ANTI-THEFT SYSTEM ( PATS) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Perform Test |
|---|---|---|---|
| B1213 | Anti-theft number of programmed encoded ignition keys below minimum | PCM | Program additional keys. For additional information, refer to KEY PROGRAMMING USING TWO PROGRAMMED KEYS . TEST the system for normal operation. |
| B2103 | Antenna not connected | PCM | Go To PINPOINT TEST A: DTC B2103 ANTENNA NOT CONNECTED . |
| B1600 | No key code received | PCM | Go To PINPOINT TEST B: DTC B1600 NO KEY CODE RECEIVED . |
| B1601 | Incorrect key code received | PCM | Go To PINPOINT TEST C: DTC B1601 INCORRECT KEY CODE RECEIVED . |
| B1602 | Invalid key code format from encoded ignition key transponder | PCM | Go To PINPOINT TEST D: DTC B1602 INVALID KEY CODE FORMAT FROM ENCODED IGNITION KEY TRANSPONDER . |
| B1681 | PATS transceiver signal is not received | PCM | Go To PINPOINT TEST E: DTC B1681 PATS TRANSCEIVER SIGNAL IS NOT RECEIVED . |
| B2431 | Transponder programming failure | PCM | Program an additional key. For additional information, refer to KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT . TEST the system for normal operation. |
| B1342 | PCM is defective | PCM | INSTALL a new PCM REFER to POWERTRAIN CONTROL MODULE (PCM) . CLEAR the DTCs. REPEAT the self-test. |