DTC Codes
MESSAGE CENTER TRANSMISSION DTC(S)
| DTC Codes | Possible Faults |
|---|---|
| P1746, P1747, P1760 | Electronic pressure control solenoid |
| P0743, P0740 | Torque converter clutch circuit |
| P0750, P0755, P0760 | Shift solenoid circuit |
| P1636, P1714, P1715, P1716, P1740 | Inductive signature error |
| P0731, P0732, P0733, P0734 | Gear ratio validation error |
| P0741, P1742, P1743, P1744 | Torque converter clutch error |
| P1783 | Over temperature |
| P1700 | Neutral error |
| P0712, P0713, P0710, P1710, P1713, P1718 |
Transmission fluid temperature error |
| P0705, P0708, P1704 | Transmission range sensor error |
| P0500, P0503 | Vehicle speed sensor error |
| P0715 | Turbine shaft speed error |
| P0720, P0721, P0722 | Transmission output shaft speed (OSS) sensor |
NOTE:
For additional information on DTC codes, refer to DIAGNOSTIC TROUBLE CODE CHARTS .
This message center will display TRANSMISSION OVERHEAT if the following code has been set.
DTC FOR TRANSMISSION OVERHEAT
| DTC Codes | Possible Faults |
|---|---|
| P1783 | Transmission fluid temperature |
NOTE:
For additional information on DTC codes, refer to DIAGNOSTIC TROUBLE CODE CHARTS .
NOTE:
If no codes are displayed, refer to INFORMATION, GAUGES & WARNING DEVICES
.
Diagnosing an electronically controlled automatic transaxle is simplified by using the following procedures. One of the most important things to remember is that there is a definite procedure to follow. Do not take short cuts or assume that critical checks or adjustments have already been made. Follow the procedures as written to avoid missing critical components or steps. By following the diagnostic sequence, the service technician will be able to diagnose and repair the concern the first time.