Torque Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Case to chain cover (10 mm socket size) | 26 | 19 | - |
| Case to chain cover (8 mm socket size) | 12 | 9 | - |
| Chain cover to case (10 mm socket size) | 25 | 18 | - |
| Chain cover to case (24 mm socket size) | 31 | 23 | - |
| Chain cover to case (13 mm socket size) | 43 | 32 | - |
| Chain cover-to-case bolts (8 mm socket site) | 11 | 8 | - |
| Chain cover-to-case Torx® bolts | 12 | 9 | - |
| Case to stator support | 11 | 8 | - |
| Transmission range sensor to case | 10 | - | 89 |
| Valve body to pump | 10 | - | 89 |
| Pump assembly to main control | 10 | - | 89 |
| Valve body/solenoid to chain cover | 10 | - | 89 |
| Pump cover to pump body | 10 | - | 89 |
| Pump body to chain cover | 10 | - | 89 |
| EPC and TCC-to-pump body | 12 | 9 | - |
| Separator plate to pump body and valve body | 11 | 8 | - |
| Park rod abutment bolts | 28 | 21 | - |
| Detent spring to chain cover | II | 8 | - |
| Lube tube support bracket bolts | 11 | 8 | - |
| Fluid pan to case (lower reservoir) | 12 | 9 | - |
| Filler lube-to-ease bolt | 11 | 8 | - |
| Reverse clutch locator bolt | 11 | 8 | - |
| Reverse clutch locator lock nut | 43 | 32 | - |
| Turbine shaft speed (TSS) sensor retaining bolt | 11 | 8 | - |
| Output shaft speed (OSS) sensor retaining boll | 10 | - | 89 |
| Shift cable-to-manual lever nut | 24 | 18 | - |
| Overdrive server cover to case | 11 | - | 8 |
| Neutral/drive accumulator retaining bolt | 11 | 8 | - |
| Pressure tap plug for chain cover and pump body | 8 | - | 71 |
| Cooler line fitting at transaxle | 20 | 15 | - |
| Transaxle shift cable bracket retaining nut | 23 | 17 | - |
| Upper transaxle-to-engine bolts | 62 | 46 | - |
| Lower engine-to-transaxle bolts - 3.0L (4V) | 40 | 30 | - |
| Lower engine-to-transaxle bolts - 3.0L (2V) | 62 | 46 | - |
| Brake hose routing clip bolt | 11 | 8 | - |
| Torque converter-to-flexplate nuts | 35 | 26 | - |
| RH engine mount-to-transaxle case bolts and nut | 62 | 46 | - |
| Dust cover to case | 10 | - | 89 |
| Transmission housing cover bolts | 10 | - | 89 |
| Engine mount bolts | 98 | 72 | - |
| Rear engine support bolts | 70 | 52 | - |
| Engine mount to support | 90 | 66 | - |
| Shaft cable stud chain cover to case | 31 | 23 | - |
| Manual lever to manual shaft | 13 | 10 | - |
| Manual cable bracket bolt | 23 | 17 | - |
| Rear engine transaxle-to-support bracket bolts | 62 | 46 | - |
| Ground strap nut | 20 | 15 | - |
| Cooler tube bracket bolts | 11 | 8 | - |
| Y-pipe assembly nuts and bolts | 40 | 30 | - |
| Brake hose routing clip bolt | 11 | 8 | - |
| Driven sprocket support bolts | 25 | 18 | - |
| Catalytic converter | 40 | 30 | - |
| Rear support brace | 47 | 35 | - |
| Cooling tube nut | 10 | 89 | - |
| Structural side pan 6 mm bolts | 12 | 9 | - |
| Structural side pan 8 mm bolts | 25 | 18 | - |
| RH engine mount-to-transaxle structural side pan bolts | 62 | 46 | - |
| RH front anti-roll restrictor bracket-to-transaxle case bolts | 62 | 46 | - |
| RH front anti-roll restrictor bolt | 62 | 46 | - |
| Cooler tube bracket bolts | 11 | 8 | - |
| Exhaust hanger-to-case stud | 10 | - | 89 |
| Electrical connector bracket | 10 | - | 89 |
| Power steering line bracket | 10 | - | 89 |
| Battery tray | 10 | - | 89 |
| RH engine mount-to-oil pan nuts | 12 | 9 | - |