LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2004 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> General Procedures >> Selector Lever Cable Adjustment - Column Shift
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Cable Adjustment - Column Shift

NOTE: The shift control adjustment procedure must be performed in the order shown.
  1. Position the transaxle range selector lever in OVERDRIVE. Hang a 1.4 kg (3 lb) weight on the lever.
  2. Loosen the manual control lever-to-shift control cable nut.
    Fig 1: Loosening Manual Control Lever-To-Shift Control Cable Nut
    G01362272Courtesy of FORD MOTOR CO.
  3. Position the manual control lever in OVERDRIVE. Tighten the manual control lever-to-shift control cable nut.
    Fig 2: Tightening Manual Control Lever-To-Shift Control Cable Nut
    G01362273Courtesy of FORD MOTOR CO.
  4. Remove the 1.4 kg (3 lb) weight. Check the operation of the transaxle in each transaxle range selector lever position.
scientia non olet · About LEMON Manuals