- The shift interlock system does not release or lock correctly
|
- Circuitry.
- Front electrical module (FEM).
- CJB Fuse 204 (5A) and 205 (5A).
- Shift lock actuator.
- Brake pedal position (BPP) switch.
|
|
- The shift control is out of correct gear relationship with bezel
|
- Transmission shift cable and bracket.
- Transmission control shifter.
|
|
- Transmission range indicator does not correspond to the gear position display on instrument cluster
|
- Transmission shift cable bracket.
|
- TIGHTEN the screws holding the transmission shift cable bracket.
|
- Transmission shift cable loose from the transmission shift cable bracket.
|
|
|
|
|
- Digital transmission range (TR) sensor.
|
|
|
|
- INSTALL a new shifter assembly.
|
- Unable to cancel overdrive
|
- Digital transmission range (TR) sensor (SST only)
- Fuse.
- TCS (base shifter).
- TCS not cycled during self-test.
- Powertrain control module (PCM).
- Circuitry.
|
|
- Instrument panel does not indicate park
|
- Park sense switch.
- Circuitry.
|
|
- Rattle, buzz, or other noise
|
|
- INSTALL a new selector lever knob.
|
|
|
- INSTALL a new selector lever bezel.
|
|
|
|
- Transmission does not shift in manual mode (SST only)
|
- Fuse.
- SST (+/- switches).
- SST (+/-) not cycled during selftest.
- Powertrain control module.
- Circuitry.
|
|
|
|
- Transmission shift cable.
|
- INSTALL a new transmission shift cable.
|
- Internal transmission components.
|
|
|
|
- INSTALL a new shifter assembly.
|
- Transmission range shifter will not move
|
- Transmission shift cable.
|
- INSTALL a new transmission shift cable.
|
- Internal transmission components.
|
|
- Brake shift interlock system.
|
|
- Transmission shifter assembly.
|
- INSTALL a new shifter assembly.
|