Anti-Lock Control
DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTCS | DTC Caused By | Description | Perform Test |
|---|---|---|---|
| B1484 | ABS Module | Brake Pedal Input Open Circuit | GO to PINPOINT TEST D . |
| B1676 | ABS Module | Battery Voltage Out of Range | GO to PINPOINT TEST E . |
| C1145 | ABS Module | Speed Wheel Sensor RF Input Circuit Failure | GO to PINPOINT TEST B . |
| C1155 | ABS Module | Speed Wheel Sensor LF Input Circuit Failure | GO to PINPOINT TEST B . |
| C1165 | ABS Module | Speed Wheel Sensor RR Input Circuit Failure | GO to PINPOINT TEST B . |
| C1175 | ABS Module | Speed Wheel Sensor LR Input Circuit Failure | GO to PINPOINT TEST B . |
| C1222 | ABS Module | Speed Wheel Mismatch | Make sure the tires are the same size and correctly inflated. INSPECT the wheel speed sensor rings. CLEAR the DTC. TEST drive the vehicle. REPEAT the self-test. |
| C1266 | ABS Module | ABS Valve Power Relay Circuit Failure | GO to PINPOINT TEST K . |
| C1296 | ABS Module | Wheel Speed LF Signal Fault | GO to PINPOINT TEST C . |
| C1297 | ABS Module | Wheel Speed RF Signal Fault | GO to PINPOINT TEST C . |
| C1298 | ABS Module | Wheel Speed RR Signal Fault | GO to PINPOINT TEST C . |
| C1299 | ABS Module | Wheel Speed LR Signal Fault | GO to PINPOINT TEST C . |
| C1300 | ABS Module | ABS Hydraulic Pump Motor Circuit Failure | GO to PINPOINT TEST A . |
| C1805 | ABS Module | Mismatched PCM and ABS Modules Do Not Match | CHECK the part numbers. INSTALL the correct module. |
| C2775 | ABS Module | TC ON/OFF Switch Stuck Failure | GO to PINPOINT TEST H . |