LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Escape Base, 2.3 Z, 4WD, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Safety Belt System >> General Procedures >> Safety Belt With Anchor Plate Thread Damage
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Safety Belt With Anchor Plate Thread Damage

  1. Remove the broken or stripped bolt and discard.
  2. Drill out the internal threads in the safety belt anchor plate with a 10.7-mm (27/64-in.) drill.
  3. Rethread the anchor plate with a 1/2-13 tap (seat belt).
  4. Clean out the chips.
  5. Install new attachment parts.
  6. When repairing a multiple belt and attachment, install the nut to the bolt in the tunnel area from the underside of the floorpan.
scientia non olet · About LEMON Manuals