Component Testing Procedure
IGNITION SWITCH (11572) - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move key to these positions | A good switch will indicate |
|---|---|---|---|
| Run power circuit | B2 and A2 | Off/Lock | Open circuit |
| B3 and A3 | Accessory | Open circuit | |
| B4 and A4 | Run | Closed circuit | |
| Start | Open circuit | ||
| Run/Start power circuit | B5 and I1 | Off/Lock | Open circuit |
| Accessory | Open circuit | ||
| Run | Closed circuit | ||
| Start | Closed circuit | ||
| Run/Acc power circuit | B1 and A1 | Off/Lock | Open circuit |
| Accessory | Closed circuit | ||
| Run | Closed circuit | ||
| Start | Open circuit | ||
| Start power circuit | GND and P2 | Off/Lock | Open circuit |
| GND and P1 | Accessory | Open circuit | |
| B1 and I2 | Run | Open circuit | |
| B4 and STA | Start | Closed circuit |