- The shift interlock system does not release/lock correctly
|
|
|
|
|
|
|
- Brake pedal position switch.
|
- The shift control is out of correct gear relationship
|
- Transmission shift cable and bracket.
|
|
- Cable retention to steering column bracket.
|
|
|
- The transmission range indicator does not correspond to the gear
|
- Transmission shift cable bracket.
|
- TIGHTEN bolts holding transmission shift cable bracket.
|
- Shift control indicator linkage.
|
- ADJUST PRNDL indicator at steering housing.
|
- Transmission shift cable loose from the transmission bracket.
|
- VERIFY the shift cable is seated in the transmission shift cable bracket.
|
- Shift cable adjustment incorrect.
|
|
- The transmission range indicator lamp does not illuminate
|
|
|
|
|
- The transmission control switch/indicator lamp not operating correctly
|
|
|
|
|
- TCS not cycled during self test.
|
- Powertrain control module.
|
|
|
- Rattle, noise, buzz, or other noise
|
|
- INSTALL a new selector lever knob.
|
- Shift control selector lever.
|
- TIGHTEN the housing bolts.
|
|
|
- ATTACH the shift interlock spring correctly.
|
- Water enters inside the vehicle
|
|
- SECURE the grommet to dash panel.
|
- Torn cable assembly grommet.
|
- INSTALL new transmission shift cable.
|
|
|
- Transmission shift cable.
|
- INSTALL a new transmission shift cable.
|
|
|
- ADJUST the cable. TIGHTEN the cable bracket screws.
|
- The transmission range selector lever will not shift from range
|
- Transmission shift cable disconnected.
|
- REINSTALL the transmission shift cable.
|
- Broken transmission shift cable.
|
- INSTALL a new transmission shift cable.
|