Adjustable Pedals With Memory Feature (Navigator only)
- Verify the customer concern by operating the adjustable pedals.NOTE: If the adjustable pedals are not installed on the vehicle, when a self-test is carried out, the module will set pedal codes.
- Visually inspect for obvious signs of mechanical or electrical damage. Refer to the following chart:VISUAL INSPECTION CHART
Mechanical Electrical - Adjustable pedals
- Adjustable pedal switch
- Damaged or corroded connector
- Damaged or corroded wiring harness
- Central junction box (CJB) fuse 109 (30A)
- If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
- If the diagnostic tool does not power up, refer to the diagnostic tool manual.
- SCP or ISO circuit fault; all electronic control units, no response/not equipped, refer to MODULE COMMUNICATIONS NETWORK .
- No response/not equipped for driver seat module (DSM), GO PINPOINT TEST A .
- System passed, retrieve and record the continuous DTCs and carry out self-test diagnostics for the DSM.
- If the DTCs retrieved are related to the concern, go to the DRIVER SEAT MODULE (DSM) DIAGNOSTIC TROUBLE CODE (DTC) INDEX .
- If no DTCs related to the concern are retrieved, GO to SYMPTOM CHART to continue diagnostics.