Driver Seat Module (DSM)

DRIVER SEAT MODULE (DSM)

Worldwide Diagnostic System (WDS):

Special Tool(s)







Removal and Installation

CAUTION: Prior to removal of the DSM, it is necessary to upload module configuration information to a diagnostic tool. This information needs to be downloaded into the new module once installed.

1. Remove the driver seat.
2. Remove the 2 DSM screws.
3. Disconnect the electrical connectors and remove the DSM.

4. NOTE: Once the module is installed, it is necessary to download the module configuration information from the diagnostic tool into the new module.

To install, reverse the removal procedure.