ABS with Stability Assist
The ABS with traction control and stability assist consists of these additional components:
- rear wheel speed sensors
- rear wheel speed sensor ring (integral to the halfshaft)
- sensor cluster (contains the accelerometer[s], roll rate sensor, and yaw rate sensor)
- steering position sensor (integral to the clockspring)
- primary brake pressure transducer
- brake pedal travel sensor
- brake pedal force switch (integral to the brake booster)
- brake booster solenoid (integral to the brake booster)
The front wheel speed sensor rings are integral to the front hub and bearing assemblies. For additional information, refer to FRONT SUSPENSION - 4X2 or to FRONT SUSPENSION - 4X4 .
The rear wheel speed sensor rings for 4 channel ABS are integral to the rear halfshaft. For additional information, refer to REAR DRIVE HALFSHAFTS .