LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Focus ZX3 S >> Repair and Diagnosis >> Engine Performance >> Engine Ignition System >> Removal And Installation >> Ignition Coil-On-Plug >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

  1. Disconnect the electrical connector.
    Fig 1: Disconnecting Ignition Coil Electrical Connector
    G03951082Courtesy of FORD MOTOR CO.
  2. Remove the bolt and the ignition coil.
    Fig 2: Removing Ignition Coil Bolt
    G03951083Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
    • Apply silicone dielectric compound to the inside of the ignition coil boot.
scientia non olet · About LEMON Manuals