Anti-Lock Brakes DTCS
ANTI-LOCK BRAKE SYSTEM (ABS) MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Perform Test |
|---|---|---|---|
| B1342 | ECU Is Defective | ABS Module |
NOTE:
If other DTCs are present, REPAIR them before installing a new component.
CLEAR the DTCs. RETRIEVE the DTCs. If DTC B1342 is retrieved, INSTALL a new module. REFER to ANTI-LOCK BRAKE SYSTEM (ABS) MODULE . REPEAT the self-test. |
| B1317 | Battery Voltage High | ABS Module | GO to PINPOINT TEST C . |
| B1318 | Battery Voltage Low | ABS Module | GO to PINPOINT TEST C . |
| B2141 | NVM Configuration Failure | ABS Module | REFER to MODULE CONFIGURATION . |
| C1095 | ABS Hydraulic Pump Motor Circuit Failure | ABS Module | GO to PINPOINT TEST D . |
| C1141 | Wheel Speed Sensor LF Tone Ring Tooth Missing Fault | ABS Module | INSPECT the LF tone ring for missing/damaged teeth or debris. INSTALL a new wheel speed sensor ring as necessary. REFER to FRONT SUSPENSION . CLEAR the DTCs. REPEAT the self-test. |
| C1142 | Wheel Speed Sensor RF Tone Ring Tooth Missing Fault | ABS Module | INSPECT the RF tone ring for missing/damaged teeth or debris. INSTALL a new wheel speed sensor ring as necessary. REFER to FRONT SUSPENSION . CLEAR the DTCs. REPEAT the self-test. |
| C1143 | Wheel Speed Sensor LR Tone Ring Tooth Missing Fault | ABS Module | INSPECT the LR tone ring for missing/damaged teeth or debris. INSTALL a new wheel speed sensor ring as necessary. REFER to REAR SUSPENSION . CLEAR the DTCs. REPEAT the self-test. |
| C1144 | Wheel Speed Sensor RR Tone Ring Tooth Missing Fault | ABS Module | INSPECT the RR tone ring for missing/damaged teeth or debris. INSTALL a new wheel speed sensor ring as necessary. REFER to REAR SUSPENSION . CLEAR the DTCs. REPEAT the self-test. |
| C1145 | Speed Wheel Sensor RF Input Circuit Failure | ABS Module | GO to PINPOINT TEST E . |
| C1155 | Speed Wheel Sensor LF Input Circuit Failure | ABS Module | GO to PINPOINT TEST E . |
| C1165 | Speed Wheel Sensor RR Input Circuit Failure | ABS Module | GO to PINPOINT TEST E . |
| C1175 | Speed Wheel Sensor LR Input Circuit Failure | ABS Module | GO to PINPOINT TEST E . |
| C1233 | Speed Wheel LF Input Signal Missing | ABS Module | GO to PINPOINT TEST F . |
| C1234 | Speed Wheel RF Input Signal Missing | ABS Module | GO to PINPOINT TEST F . |
| C1235 | Speed Wheel RR Input Signal Missing | ABS Module | GO to PINPOINT TEST F . |
| C1236 | Speed Wheel LR Input Signal Missing | ABS Module | GO to PINPOINT TEST F . |
| C1267 | ABS Functions Temporarily Disabled | ABS Module | GO to PINPOINT TEST G . |
| C1446 | Brake Switch Circuit Failure | ABS Module | GO to PINPOINT TEST B . |
| C1470 | TCS Functions Temporarily Disabled (Thermal Brake Protection) | ABS Module | Allow brakes to cool. CLEAR the DTCs. REPEAT the self-test. |
| U1900 | CAN Communication Bus Fault Receive Error | Network Fault | REFER to MODULE COMMUNICATIONS NETWORK . |
| U2012 | Communication Bus Error (Non-SCP) | Network Fault | REFER to MODULE COMMUNICATIONS NETWORK . |
| U2023 | Invalid Configuration Data Received | PCM | REFER to MODULE COMMUNICATIONS NETWORK . |
| U2202 | Invalid Configuration Data Received | PCM | REFER to the MODULE CONFIGURATION . |