Transaxle Case: Assembly

NOTE: The converter housing side bearing cups for the transfer shaft bearing and differential case bearing will be installed during the assembly of the transaxle.

Fig 1: Installing Final Drive Input Gear Bearing Cup Using Special Tool

Courtesy of FORD MOTOR CO.

Using the special tools, install the final drive input gear bearing cup.
Rotate the transaxle 180 degrees.

NOTE: Note the location of the bleed hole

NOTE: Inspect the bleed hole for foreign material.

Fig 2: Installing Funnel

Courtesy of FORD MOTOR CO.

Install the funnel.
Using the special tools, install the left-hand side transfer shaft gear bearing cup.

Fig 3: Installing Left-Hand Side Transfer Shaft Gear Bearing Cup Using Special Tool
Courtesy of FORD MOTOR CO.
Using the special tools, install the final drive input gear bearing cup (left-hand side shown).

Fig 4: Installing Final Drive Input Gear Bearing Cup Using Special Tool (Left-Hand Side)
Courtesy of FORD MOTOR CO.
Using the special tools, install the left-hand side differential case bearing cup.

Fig 5: Installing Left-Hand Side Differential Case Bearing Cup Using Special Tool
Courtesy of FORD MOTOR CO.
Using the special tools, install the half shaft seals (left-hand side shown).

Fig 6: Installing Half Shaft Seals Using Special Tool (Left-Hand)
Courtesy of FORD MOTOR CO.