LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Freestar Base >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> Fuel System & Engine Control System >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

  1. Remove the LH lower B-pillar trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Disconnect the fuel pump driver module electrical connector.
  3. Remove the fuel pump driver module nuts.
    • To install, tighten to 5 Nm (44 lb-in).
  4. Remove the fuel pump driver module.
  5. To install, reverse the removal procedure.