LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Freestar Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Repair >> Output Shaft Speed (OSS) Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Output Shaft Speed (OSS) Sensor: Removal

  1. Remove the catalytic converter. For additional information, refer to EXHAUST SYSTEM .
  2. Remove the heat shield.
    Fig 1: Removing Heat Shield
    G04004721Courtesy of FORD MOTOR CO.
  3. Disconnect the output speed shaft speed (OSS) sensor connector.
    Fig 2: Disconnecting Output Speed Shaft Speed (OSS) Sensor Connector
    G03955954Courtesy of FORD MOTOR CO.
  4. Remove the OSS cover.
    1. Remove the connector.
    2. Remove the bolt.
    3. Remove the cover.
    Fig 3: Removing OSS Cover
    G04004723Courtesy of FORD MOTOR CO.
  5. Remove the OSS sensor.
    Fig 4: Removing OSS Sensor
    G03956818Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals