LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Freestyle SE, AWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System & Engine Control System >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

    All vehicles 

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .

    2. Five Hundred 

  2. Remove the rear seat cushion and the rear corner backrest. For additional information, refer to SEATING .

    3. Freestyle 

  3. Remove the C-pillar trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .

    4. All vehicles 

  4. Disconnect the fuel pump driver module (FPDM) electrical connector.
  5. Remove the 2 nuts and the FPDM.
    • To install, tighten to 5 Nm (44 lb-in).
  6. To install reverse the removal procedure.
scientia non olet · About LEMON Manuals