LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Control System >> Removal And Installation >> Powertrain Control Module (PCM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (PCM): Installation

  1. Install the PCM and the 2 bolts.
    • Tighten to 8 Nm (71 lb-in).
  2. Connect the 3 PCM electrical connectors.
  3. Connect the battery ground cable. For additional information, refer to BATTERY DISCONNECT & CONNECT .
  4. Restore the module configuration. Carry out the module configuration restore steps of the PROGRAMMABLE MODULE INSTALLATION procedure.
  5. Reprogram the passive anti-theft system (PATS). Carry out the KEY PROGRAMMING -- PROGRAM A KEY USING TWO PROGRAMMED KEYS procedure.
  6. For automatic transmission/CVT equipped models, carry out the TRANSMISSION DRIVE CYCLE TEST .
scientia non olet · About LEMON Manuals