Anti-Lock Brakes DTCS

ANTI-LOCK BRAKE SYSTEM MODULE DIAGNOSTIC TROUBLE CODE LIST

DTC	Description	Source	Action
B1342	ECU Is Defective	ABS	NOTE: If other DTCs are present, REPAIR them before installing a new component. CLEAR the DTCs. RETRIEVE the DTCs. If DTC B1342 is retrieved, INSTALL a new module. REFER to ANTI-LOCK BRAKE SYSTEM (ABS) MODULE . REPEAT the self-test.
B1676	Battery Pack Voltage Out of Range	ABS	GO to PINPOINT TEST B .
B2477	Module Configuration Failure	ABS	Follow the diagnostic tool directions for the calibration procedure. REFER to MODULE CONFIGURATION .
B2900	VIN Mismatched	ABS	VERIFY that the module has the correct as-built data.
C1095	ABS Hydraulic Pump Motor Circuit Failure	ABS	GO to PINPOINT TEST C .
C1145	Wheel Speed Sensor RF Input Circuit Failure	ABS	GO to PINPOINT TEST D .
C1155	Wheel Speed Sensor LF Input Circuit Failure	ABS	GO to PINPOINT TEST D .
C1165	Wheel Speed Sensor RR Input Circuit Failure	ABS	GO to PINPOINT TEST D .
C1175	Wheel Speed Sensor LR Input Circuit Failure	ABS	GO to PINPOINT TEST D .
C1233	Wheel Speed LF Input Signal Missing	ABS	GO to PINPOINT TEST E .
C1234	Wheel Speed RF Input Signal Missing	ABS	GO to PINPOINT TEST E .
C1235	Wheel Speed RR Input Signal Missing	ABS	GO to PINPOINT TEST E .
C1236	Wheel Speed LR Input Signal Missing	ABS	GO to PINPOINT TEST E .
C1805	Mismatched PCM and/or ABS Module	ABS Module	VERIFY that the PCM and ABS modules have the correct as-built data. REFER to MODULE COMMUNICATIONS NETWORK or INTRODUCTION -- GASOLINE MODELS . RECONFIGURE or INSTALL a new component as necessary. FOLLOW the diagnostic tool directions for the ABS module configuration. CLEAR the DTC. REPEAT the self-test.