LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2006 >> Crown Victoria Base, 4.6 W >> Repair and Diagnosis >> Engine Performance >> Engine Ignition System >> Removal And Installation >> Ignition Coil-On-Plug >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

  1. Disconnect the negative battery cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the air cleaner outlet pipe. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .
  3. Disconnect the electrical connector from the ignition coil-on-plug.
  4. Remove the bolt from the ignition coil-on-plug.
    • To install, tighten to 10 Nm (89 lb-in).
  5. Remove the ignition coil-on-plug.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals