LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2006 >> Expedition 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Connecting Rod Bend
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Connecting Rod Bend

  1. Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.
    • Refer to ENGINE for the procedure.
    • If out of specification, install new components as necessary. Refer to ENGINE for the procedure.
      Fig 1: Measuring Connecting Rod Bend
      G03885036Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals