- The shift interlock system does not release/lock correctly
|
- Circuitry
- Fuse(s):
- Shift lock actuator
- Brake pedal position (BPP) switch
|
|
- The shift control is out of correct gear relationship
|
- Transmission shift cable and bracket
- Selector lever indicator
- Shift control linkage
|
|
- Transmission range (TR) indicator does not correspond to the gear
|
- Transmission shift cable bracket
|
- TIGHTEN bolts holding the transmission shift cable bracket.
|
- Transmission control indicator linkage
|
|
- Transmission shift cable loose in the transmission retainer bracket
|
- VERIFY cable is fully seated in the transmission bracket.
|
|
|
|
- Clip securing the transmission shift cable to the steering column bracket
|
|
- Transmission range indicator lamp does not illuminate
|
|
|
- The transmission control (TC) switch is inoperative
|
- Fuse:
- TC switch
- TC switch not cycled during self-test
- Powertrain control module (PCM)
- Circuitry
|
|
- The transmission control indicator lamp (TCIL) is not operating correctly
|
- Bulb
- Instrument cluster
- Powertrain control module (PCM)
|
|
- Rattle, buzz or other noise
|
|
- INSTALL a new selector lever knob.
|
- Shift control selector lever
|
|
|
|
- ATTACH shift interlock spring correctly.
|
- Water enters inside the vehicle
|
|
- SECURE grommet to floor panel.
|
- Torn cable assembly grommet
|
- INSTALL a new transmission shift cable.
|
|
|
|
- INSTALL a new transmission shift cable.
|
|
|
- ADJUST cable. TIGHTEN cable bracket screws.
|
- Transmission range selector lever will not shift
|
|
- REINSTALL transmission shift cable.
|
|
|
- INSTALL a new bracket clip.
|
- Broken transmission shift cable
|
- INSTALL a new transmission shift cable.
|