LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2006 >> Expedition 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle/Transmission External Controls >> Removal And Installation >> Selector Lever Knob >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Knob: Installation

  1. Install the selector lever knob and the 2 screws.
    Fig 1: Locating Selector Lever Knob Screws
    G04628920Courtesy of FORD MOTOR CO.
    2. NOTE: The selector lever button spring must be aligned on the locator on the underside of the selector lever knob bezel.
    Fig 2: Locating Selector Lever Knob Bezel
    G04628921Courtesy of FORD MOTOR CO.
  2. Install the selector lever knob bezel.
    3. NOTE:
    1. The tool relief opening should be at the bottom of the button assembly.
    2. It may be necessary to put pressure on the top of the selector lever knob bezel while installing the selector lever button.
    Fig 3: Locating Selector Lever Ring
    G04628922Courtesy of FORD MOTOR CO.
  3. Install the selector lever button.
scientia non olet · About LEMON Manuals