Selector Lever Indicator Adjustment

Remove the instrument cluster finish panel. For additional information, refer to REMOVAL AND INSTALLATION .
Place the transmission control selector lever in the (D) position.
- Rotate the transmission control selector lever clockwise until it bottoms out (first gear), then rotate two detents counterclockwise ((D) position).
Hang a three pound weight on the transmission control selector lever.
Center the pointer in the middle of the (D) position.
- Rotate the thumbwheel located on the bottom of the steering column to adjust the pointer.
  
  Fig 1: Identifying Selector Lever Indicator Adjustment
  Courtesy of FORD MOTOR CO.
Remove the three pound weight.
Carefully move the shift control selector lever from detent to detent and compare with transmission settings.
- Readjust if necessary.
Install the instrument cluster finish panel. For additional information, refer to REMOVAL AND INSTALLATION .