Engine Control Module: Service and Repair

POWERTRAIN CONTROL MODULE (PCM)

Special Tool (s):

Special Tool(s)







Removal and Installation

1. NOTE: Refer to worldwide diagnostic system (WDS) hook-up procedure.

Connect the diagnostic tool to the vehicle. Allow the diagnostic tool to identify the vehicle and obtain configuration data.
- All programmable module information will automatically be retrieved by the WDS.

2. Disconnect the battery ground cable.
3. Disconnect the powertrain control module (PCM) electrical connectors.
4. Remove the bolts and the PCM.
- To install, tighten to 10 Nm (89 lb-in).

5. To install, reverse the removal procedure.