Pump Assembly: Assembly

NOTE: The smaller gear has a recess on both sides.

NOTE: The smaller recess must face away from the torque converter seal.

NOTE: The larger recess, with the beveled edge, must face toward the torque converter.

Lubricate the gears and thrust washers with clean automatic transmission fluid.

Fig 1: Locating Pump Gears
Courtesy of FORD MOTOR CO.
Using the special tool, install the pump seal.
- Lubricate the gears and thrust washers with automatic transmission fluid.
  
  Fig 2: Identifying Special Tool (205-115) Into Pump Seal
  Courtesy of FORD MOTOR CO.
Install the top portion of the pump.
- Tighten to 10 Nm (89 lb-in).
  
  Fig 3: Locating Pump Assembly Bolts
  Courtesy of FORD MOTOR CO.