LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2006 >> Fusion S, Standard >> Repair and Diagnosis >> Quick Lookups >> DTC Index >> Anti-Theft Systems DTCS >> Passive Anti-Theft System DTCS
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Passive Anti-Theft System DTCS

PASSIVE ANTI-THEFT SYSTEM (PATS) - DIAGNOSTIC TROUBLE CODES (DTC) LIST

DTC Description Source Action
B1213 Anti-Theft Number of Programmed Keys is Below Minimum Instrument Cluster GO to PINPOINT TEST A .
B1342 ECU is Faulted Instrument Cluster CLEAR the DTCs. CARRY OUT the instrument cluster self-test. If DTC B1342 is retrieved, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER .
B1600 PATS Key Transponder Signal is Not Received - Damaged Key or Non-PATS Key Instrument Cluster GO to PINPOINT TEST D .
B1601 PATS Received Incorrect Key-Code From Ignition Key Transponder (Unprogrammed PATS Key) Instrument Cluster GO to PINPOINT TEST E .
B1602 PATS Received Invalid Format of Key-Code From Ignition Key Transponder (Partial Key Read) Instrument Cluster GO to PINPOINT TEST F .
B1681 PATS Transceiver Module Signal is Not Received (Damaged, Not Connected, or Damaged Wiring) Instrument Cluster GO to PINPOINT TEST G .
B2103 Defective Transceiver Instrument Cluster INSTALL a new PATS transceiver. REFER to PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER .
B2141 NVM Memory Failure (No Target ID Stored in Instrument Cluster) Instrument Cluster GO to PINPOINT TEST C .
B2431 Transponder Programming Failed Instrument Cluster GO to PINPOINT TEST D .
B2477 Module Configuration Failure Instrument Cluster CONFIGURE the Instrument cluster, REFER to MODULE CONFIGURATION . CLEAR the DTCs. REPEAT the self-test. If the DTC B2477 is retrieved, INSTALL a new instrument cluster, REFER to INSTRUMENT CLUSTER .
U1900 CAN Communication BUS Fault Instrument Cluster DTCs DTC B2141 and U2510 should be present along with U1900. GO to PINPOINT TEST C . If not, refer to MULTIFUNCTION ELECTRONIC CONTROL MODULES .
U2510 CAN - Invalid data for Vehicle Security Instrument Cluster GO to PINPOINT TEST C .
U2511 CAN - Data Mis-Match (Receive data does not match expected) Instrument Cluster GO to PINPOINT TEST B .