Anti- Lock Brake System
- Specifications
- Description And Operation
- Diagnosis And Testing
- Anti-Lock Control
- Notes
- Principles of Operation
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: No Communication With the Anti-Lock Brake System (ABS) Module
- Pinpoint Test B: DTCs B1317 And B1318 - Battery Voltage High/Low
- Pinpoint Test C: DTCs C1095 And C1096 - ABS Hydraulic Pump Motor Circuit Failure/Open
- Pinpoint Test D: DTCs C1145, C1155, C1165 And C1175 - Wheel Speed Sensor Input Circuit Failure
- Pinpoint Test E: DTCs C1222, C1233, C1234, C1235 And C1236 - Wheel Speed Sensor Input Signal Missing/Mismatch
- Pinpoint Test F: DTC C1446 - Brake Switch Circuit Failure
- Pinpoint Test G: Spongy/Soft/Low Brake Pedal with No Warning Indicator
- Pinpoint Test H: Poor Vehicle Tracking During Anti-lock Function
- Pinpoint Test I: DTC C1095 - Traction Control Switch Circuit Failure and/or The Traction Control System Cannot Be Disabled
- Pinpoint Test J: The Traction Control Switch Indicator is Never/Always On
- Anti-Lock Control
- Removal And Installation